图片名称

ZW Vibrating Feeder

The ZW Vibrating Feeder features a robust structure, thin-oil lubrication, adjustable amplitude, and stepless speed control for reliable operation, easy maintenance, and continuous, uniform feeding.

Product Features:

Continuous and Uniform Feeding；Stable and Reliable Operation；Adjustable Feeding Amplitude；Stepless Speed Control；Thin-Oil Lubrication；Easy Maintenance；Simple, Heavy-Duty Structure

Input Size：

Capacity：

80-2500t/h

Material：

Limestone, granite, basalt, river pebbles, iron ore, coal, gravel, sand, and other bulk ores and rocks.

Details Performance

Parameters

Maintenance

Case

Details Performance

Parameters

Maintenance

Case

Details Performance

图片名称

Optimized Impeller Enhances Efficiency By 30% And Reduces Wear By 40%

Through systematic mechanical analysis and verification,  Compared with the traditional sand makers, VSI5X Sand Maker obviously increases the material throughput and ratio of crushing, and enhances the working efficiency by 30%-60%. The wear costs of vulnerable parts reduce by more than 40%.

图片名称

Hydraulic Device to Open the Cover Automatically Reduces Maintenance Costs

In consideration of the maintenance and part replacement during the production of the sand maker, By only pressing a button, users can open the top cover of the machine to carry out following operations. So, this system greatly saves labor costs and enhances the service efficiency.

图片名称

Split-Type Structure, Extended Service Life of Spare Parts

Based on the actual situations of production, we found that some spare parts like the periphery guard board and impact block always wear terribly at some specific points. So, to avoid this phenomenon,  which not only greatly extends service life of quick-wear parts, but also reduces their using costs a lot.

图片名称

Brand New Feed Mode

In consideration that customers may have two production demands (i.e. sand making and shaping) which require the switch between central feeding and fall feeding

Parameters

Specification parameters

 
ZW Feeder Specification Parameters
Model Length Width Height
ZW0820 1945 1420 1515
ZW0940 3885 1525 2015
ZW1020 1945 1620 1515
ZW1220 1945 1820 1515
ZW1420 1945 2020 1515
ZW1620 2102 2246 1508
ZW1150 4855 1765 2320
ZW1250 4855 1865 2320
ZW1260 5730 1945 2825
ZW1360 5730 2045 2825
ZW1560 5730 2245 2825
ZW1760 5730 2445 2825
ZW1820 1945 2446 1498
ZW1838 3825 2705 2390
ZW1845 4420 2750 2580
ZW1860 5730 2545 2825
ZW2060 5730 2745 2825
ZW2245 4420 3150 2580

Performance parameter

 
ZW Feeder Performance Parameters
Model Size
(mm×mm)		 Max. feeding
size
(mm)		 Spindle
speed
(r/min)		 Double
amplitude
(mm)		 Installation
inclination
(°)		 Capacity
(t/h)		 Power
(kW)
ZW0820 800×2000 ≤200 500-850 8-10 14 80-200 11
ZW0940 900×4000 ≤500 500-850 8-10 14 80-200 15
ZW1020 1000×2000 ≤250 500-850 8-10 14 300-400 11
ZW1220 1200×2000 ≤250 500-850 8-10 14 350-600 15
ZW1420 1400×2000 ≤250 500-850 8-10 14 400-700 15
ZW1620 1600×2000 ≤250 500-850 8-10 14 450-800 18.5
ZW1150 1100×5000 ≤600 500-850 8-10 14 360-550 22
ZW1250 1200×5000 ≤700 500-850 8-10 14 400-600 30
ZW1260 1200×6000 ≤700 500-850 8-10 18 400-600 37
ZW1360 1300×6000 ≤700 500-850 8-10 18 450-800 37
ZW1560 1500×6000 ≤900 500-850 8-10 18 450-1100 45
ZW1760 1700×6000 ≤1000 500-850 8-10 18 500-1200 45
ZW1820 1800×2000 ≤250 500-850 8-10 14 400-850 22
ZW1838 1800×3800 ≤1000 500-850 8-10 20 650-2200 37
ZW1845 1800×4500 ≤1000 500-850 8-10 20 650-2200 45
ZW1860 1800×6000 ≤1000 500-850 8-10 18 550-1300 45
ZW2060 2000×6000 ≤1000 500-850 8-10 18 650-1400 55
ZW2245 2200×4500 ≤1000 500-850 8-10 20 800-2500 45

Maintenance

Jaw Crusher - Installation

The jaw crusher is a large crusher installed and receives no-load testing in the manufacturer's workshop. However it is disassembled into components for transport.

Jaw crusher - Lubrication

1. To ensure normal operation and extend service life of the crusher, regular lubrication shall be performed.
2. Grease in the bearing block shall be replaced every 3 to 6 months.

Jaw Crusher - Troubleshooting

1. Movable jaw does not rotate while flywheel is rotating
2. Crushing plate shakes and makes collision noise

Crushing Production Line - Installation

Preparation before foundation concrete placement
1. Set markings for placement thickness control, for example, horizontal standard piles or elevation piles.

MORE

CASE

Granite crushing project of cone crushers in Thailand

Four HPY300 hydraulic cone crushers in Chunburi, Thailand.

MORE

PE500*750 Stone crushing line in Suriname, South America

Location: Suriname, South America 

Raw material: Granite

Capacity:50-70tph

Equipment list: ZW0730 Vibrating feeder,PE500*750、PEX250*1200*2 Jaw crusher, 

MORE

Leimeng Group's 300 ton series LDC110 crawler jaw mobile crushing station arrived at the project site in Guangzhou and successfully completed delivery.

Location: Guangzhou 

Capacity:300tph

Equipment list: LDC110 crawler jaw mobile crushing station

MORE

Submit Demands Online

SUBMIT

You can leave your message here, we'll send you an Email immediately.